General Information - WIKA PGS23 Mode D'emploi

1. General information

1. General information
The contact pressure gauge described in the operating instructions has been designed
„
and manufactured using state-of-the-art technology. All components are subject to strin-
gent quality and environmental criteria during production. Our management systems are
certified to ISO 9001 and ISO 14001.
EN
These operating instructions contain important information on handling the instrument.
„
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations
„
for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
„
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
„
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
„
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
„
Subject to technical modifications.
„
Further information:
„
- Internet address:
- Relevant data sheet:
4
www.wika.de / www.wika.com
PM 01.03 (model 111.11.050)
PM 01.05 (model 131.11.050)
PV 22.02 (models PGS23.1x0, PGS26.1x0)
PV 22.03 (models PGS23.063, PGS26.063)
PV 24.03 (model PGS43.1x0)
PV 27.05 (model DPGS43.1x0)
PV 27.13 (model DPGS43HP.1x0)
PM 02.11 (model 232.35.063)
PV 24.07 (model 432.56)
PV 25.02 (model 532.54)
PV 26.06 (model 632.51)
Pressure gauges with inductive contact model 831, for hazardous areas