Vectron POS Vario Manuel Utilisateur page 172

V e C T rOn P O S H a rdwa re
When pressing the <Mode> or <M> key you can select bet-
ween „X-reports" and „Z-reports".
"X-reports" are interim reports, the memory is not dele-
ted. All data is kept for further reading and processing.
"Z-reports" are final reports, the memory is reset to zero
and the report cannot be restored!
After choosing either an X-report or a Z-report, you may
decide which report is to be printed. The following are
short descriptions of some of the most common reports.
C a s h i e r s
An overview of the financial data for each operator.
C a s h i e r (si n g l e)
An overview of the fina2ncial data for only one operator.
C a s h i e r i nvo i ces
Shows the invoices that were created by each operator in
the reporting period.
•
•
O p e n G Cs
Lists all guest checks that have not yet been paid.
I nvo i ces
Shows all invoices that were created in the reporting peri-
od.
•
•
172
X-report creates a subtotal invoice with the guest
An
check still open for service
A Z-report creates a final invoice and closes the guest
check
X-report creates a subtotal invoice with the guest
An
check still open for service
A Z-report creates a final invoice and closes the guest
check