Vectron POS Vario Manuel Utilisateur page 166

V e C T rOn P O S H a rdwa re
11. G e t t ing s t ar t ed
Place the cash register on a stable and even surface. The set-up
area must guarantee that the cash register is protected from bad
influences such as high or low temperatures, high air humidity
or splash. Please refer to the technical data for all relevant data
concerning the set-up area.
The power connection of the Vectron POS system is at the bottom.
First connect the external power pack Vectron PS10. Then con-
nect the external power pack with the power supply network.
Please note:
Please use exclusively the delivered Vectron PS10 for the
power supply of your Vectron POS system.
Other power supplies may damage or destroy the POS
system.
Attention!
No liability is accepted for such damages!
The mains switch of the Vectron POS system is also at the bottom.
Use the switch to start the POS system.
The display is now illuminated and the POS system carries out a
self test where various values are indicated, e.g. hardware versi-
on, software version, series number and available memory.
166