Astralpool Maxim Manuel D'installation Et De Maintenance page 7

2. GENERAL SAFETY REGULATIONS
GENERAL
- Install the pump units in line with the specific instructions for each installation.
- Respect current regulations regarding accident prevention.
- All modifications to the pump require prior authorization from the manufacturer. Original
spare parts and accessories authorized by the manufacturer ensure greater safety. The pump
manufacturer is exempt from all liability regarding any damage caused by unauthorized spare
parts or accessories.
- When working on each unit or others connected to them, disconnect the unit from the power
supply and the start-up devices, as the electrical parts of the pump are live during operation.
- To guarantee safety when operating the machine, you must comply with the installation and
service instructions.
- In the event of defective operation or faults, contact your supplier or nearest dealer.
WARNINGS DURING INSTALLATION AND ASSEMBLY WORK
- In cases of junction box connections only: when connecting the electrical wiring to the
motor, check the layout inside the connection box and make sure there are no pieces of
wiring inside after it has been closed and that the grounding conductor is correctly con-
nected. Connect the motor in line with the wiring diagram attached to the machine.
- In cases of junction box connections only: make sure that the electrical wiring connections
to the terminal box are well mounted and screwed tightly to the connection terminals.
- Ensure the seal of the motor's junction box is properly fitted to prevent water getting in.
Likewise, position and tighten the gland inside the cable duct of the junction box.
- Make sure that water is unable to enter the motor or the live electrical parts.
- Where the intended use is not as indicated, additional technical adaptations and regulations
may apply.
WARNINGS DURING START-UP
- Before starting the machine, check the calibration of the electric protection devices on the
motor and that the protection against electrical and mechanical contacts is correctly posi-
tioned and secure.
Installation and general maintenance manual - POOL PUMPS 7