Operating Elements; Safety Notes; Applications - Monacor PA-1140RCD Mode D'emploi

All operating elements and connections de scribed
can be found on the fold-out page 3.

1 Operating Elements

1 Button EJECT to eject the CD
2 Button POWER for switching the unit on and off
3 Button MODE to switch between CD replay, MP3
replay via the USB port (10) and radio reception
4 Button BAND to select the reception bands for the
radio
5 CD slot
6 Station button 1 or
for CD/MP3 operation: Pause / Start
7 Station button 2 or
short playing of all title beginnings for CD / MP3
operation
8 Station button 3 or
repeat of the current title for CD/ MP3 operation
9 Button AF/REG for the function: alternative fre-
quency for RDS reception
10 USB port for inserting a USB flash drive
11 Buttons TRACK/TUNE
CD / MP3: To go to the next title or to go back to the
previous title; fast forward/reverse run
with the button kept pressed
Radio: station tuning
To start the automatic station finding,
shortly press the corresponding button.
For manual station finding, keep the but-
ton or
shortly displayed. Then adjust the sta-
tion with the button
12 Button DISP for switching the display to various
information (e. g. time, programme type, ID3 tags)
13 Display
14 Station button 4 or random replay for CD / MP3
oper ation
15 Station buttons 5 and 6 or folder selection for CD /
MP3 operation
16 Button PTY to select the programme type for RDS
reception
17 Volume control LEVEL
pressed until MANUAL is
or .

2 Safety Notes

The insertion module corresponds to all relevant direc-
tives of the EU and is therefore marked with
G
The insertion must only be installed by qualified,
specialized personnel.
G
The insertion is suitable for indoor use only. Protect
it against dripping water and splash water, high air
humidity, and heat (admissible ambient temperature
range 0 – 40 °C).
G
Do not set the unit with the installed insertion into
operation, and immediately disconnect the mains
plug from the mains socket if
1. there is visible damage to the insertion, the unit,
or to the mains cable,
2. a defect might have occurred after a drop or simi-
lar accident,
3. malfunctions occur.
The insertion or the complete unit must in any case
be repaired by skilled personnel.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the unit and no liability for
any resulting personal damage or material damage
will be accepted if the insertion is used for other pur-
poses than originally intended, if it is not correctly
installed or operated or not repaired in an expert
way.
If the insertion is to be put out of operation
definitively, take it to a local recycling plant for
a disposal which is not harmful to the envi-
ronment.

3 Applications

The insertion module is suitable for installation into PA
amplifiers from MONACOR with an insertion compart-
ment and into basic units for insertions from MONA-
COR, e. g.:
PA-1120 PA amplifier for 5 zones
PA-1200 PA amplifier for 4 zones
PA-1200EX basic unit for 2 insertions
PA-1204EX basic unit for 4 insertions
PA-1240 PA amplifier for 5 zones
PA-5240 PA amplifier for 5 zones
PA-5480 PA amplifier for 5 zones
PA-6240 PA amplifier for 6 zones
PA-6480 PA amplifier for 6 zones
PA-6600 PA amplifier for 6 zones
GB
.
9