Signal Indicators; Decommissioning And Disposal - ELMON 42-622 Manuel D'utilisation

ELMON relay 42-622
Safety Relay

10.1 Signal indicators

Corresponding fault messages are indicated by the output of flashing sequences via the green LED.
LED
Power
(green)
Note: If an fault message is present, all safety outputs are inactive!

11 Decommissioning and disposal

The products manufactured by ASO are exclusively intended for commercial use (B2B). At the end of
use, the products must be disposed of according to all local, regional and national regulations. ASO is
also happy to take back the products and disposes of them properly.
Pulse
1x Voltage supply outside the valid value range
3x
4x
5x Data transmission between micro-controllers faulty
6x
7x Fault Change configuration Reset or signal relay
8x
Meaning
Output control CH1 faulty
Output control CH2 faulty
Fault when testing signal input
Fault message Handling Reset Input
33