Sound Bar; Standby Mode - Yamaha YAS-152 Mode D'emploi

Playing back audio from a

sound bar

1
Press the BLUETOOTH key on the supplied remote control to select
as the input source.
The BLUETOOTH indicator on the front panel lights up in green.
Lights up
2
Turn on the device.
When Bluetooth connection is made correctly, the BLUETOOTH indicator of the
sound bar flashes 3 times.
Flashes 3 times
3
Play back a song on the device.
NOTE
• Perform Bluetooth connection with the device and sound bar within 10 meters (33 ft) of each other.
• It may be necessary to select "YAS-152 Yamaha" in the Bluetooth device list again, in the event that a
connection problem occurs. You may have to change the output setting to output audio to the unit,
depending on the Bluetooth device you are using.
• Adjust the volume level of the Bluetooth device as required.
• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect
with the new device.
Terminating connection
Bluetooth connection is terminated in the following cases. When the Bluetooth
connection is terminated, the BLUETOOTH indicator flashes once.
• The compatible device is turned off.
• The BLUETOOTH key is pressed for more than 3 seconds.
• The sound bar is turned off.
device on the Using the
The Bluetooth standby mode allows you to turn on (or off) the sound bar automatically,
that interlocked by the operation of the Bluetooth device.
How to set
With the sound bar turned on, hold down the BLUETOOTH STANDBY key
for more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
When the Bluetooth standby mode is enabled and the sound bar is turned off, the
STATUS indicator lights up in red.
Functions available on
Power on interlock function (when the sound bar is turned off)
When Bluetooth connection is made on the device, the sound bar will turn on and will be ready to play
back sound from the device.
Power off interlock function (when the sound bar is turned on)
The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only
when BLUETOOTH is selected as the input source.)
Using the Home Theater Controller application
By installing the dedicated free application "Home Theater Controller" to a Bluetooth
device, such as a smartphone, you can perform various operations easily and
conveniently with the Bluetooth device. (Setting items: basic operation, sound-field,
sound adjustments)
For details on "Home Theater Controller", see the product information on our website.

standby mode

Flash 3 times (enabled), flash once (disabled)
Lights up (red)
devices with standby mode enabled
9