Schedule List - JVC LT-39HW45U Guide D'utilisation

Chapter 5
• Navigate through the different types and
subtypes using the navigation buttons on the
remote control.
• Select one or more types, which you want to
highlight from the Type list, press OK to select (or
deselect). A checkmark will appear to the left of
the type when selected. When you select a type,
all its subtypes will be selected accordingly.
• Also, you can select some desired subtypes
without selecting any type first.
• Press the blue button to exit the type and
subtype list.
• After filtering, all your desired digital TV
programmes will be highlighted.
- Add schedule (Option): Press OPTION on the
remote control to bring up the Schedule list
menu. For details on scheduled recording, refer
to the Schedule list section.
3. Press GUIDE/EXIT to exit the EPG and switch to
the selected channel.
PVR(Personal Video Recorder)
Allows you to record your favourite TV programme.
Before you use the function, connect a USB memory
device to the set first.
Note: Feature is available only in selected products
and due to specific TV network limitations and
country technical requirements might not be
available in product or place of installation.
Feature might be also blocked by TV network
due to copyright protection (HD content,
recording protection). Please use Option on the
remote control to check if feature is available in
your product.
1. Press OPTION on the remote control and select
Quick access > PVR.
2. Press OK/► to enter.
3. Press:
- the red button to start recording, the record file
is put into a PVR folder in Media center > Video
and named after the channel number;
- the green button to stop recording manually; if
the recording duration finishes, the recording will
stop automatically.
- ▲/▼/◄/ ► to adjust the recording duration.
4. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. To watch the recorded programme, exit PVR mode
first and go to Media center > Video. Select the
folder PVR, then select the related record file.
Press OK to play. (It is the same if you record a
digital radio programme).
Notes:
- Feature available only for digital non encrypted
channels. Even when CICAM (CI or CI+) is
inserted, feature is not available on encrypted
channels.
- Only supports USB memory device of FAT32
format.
- Before you connect the USB device to the set,
make sure you have backed up the data in the
device to avoid the loss of your important data
due to unforeseen malfunction.
- The bigger the USB device memory size for the
PVR function, the longer the recording time.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play files normally if the
parameters of the file exceed the limitations of
the system, the file format is not supported, the
file is damaged, or the file cannot be decoded.
- Do not disconnect the USB memory device when
the system is reading a file or transmitting data,
otherwise the system or the device may be
damaged.

Schedule list

This function is used to perform scheduled recording.
1. Press OPTION on the remote control and select
Quick access > Schedule list.
2. Press OK to display the schedule list.
3. To add a schedule into your schedule list, press
the red button first to display Schedule list. Then,
- Channel number: use ◄/►
channel number.
- Start date: use the
the recording date.
- Start time: set the starting time of
- Stop time: set the stopping time of
- Schedule type:
• Set Reminder to be reminded that you can
switch to the scheduled programme when the
time you have
you do not execute any operation, the dialog box
will disappear and no further operation will be
executed.
• Set Record to check if you really want to start
your scheduled recording when the time you
have set comes. When time is out and you
not execute any operation, scheduled recording
will start automatically.
- Repeat type: set different repeat modes
recording.
▲/▼/◄/ ►
4. Press
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter.
7. Press EXIT to close the menu.
EN 12
Using more of your TV
to select the
alphanumeric buttons to set
the recording.
the recording.
set comes. When time is out and
to select Add, then press OK to
do
for the