Selecting Decoding Page Language In Teletext; Digital Teletext Language; Network Update; Common Interface - JVC LT-39HW45U Guide D'utilisation

Enabling subtitle languages on digital TV channels
1. Press MENU on the remote control and select
Options > Subtitle > Digital subtitle language.
2. Press ◄/► to select a subtitle language as your
preferred language.
3. Press ▲/▼ to select Digital subtitle language
2nd.
4. Press ◄/► to select a secondary subtitle language.
5. Press EXIT to close the menu.
Shortcut operation: Press SUBTITLE on the remote
control to directly select a subtitle language available
for the selected digital TV programme.
Selecting a subtitle type on digital TV channels
1. Press MENU on the remote control and select
Options > Subtitle > Subtitle type.
2. Press ◄/► to select a subtitle type. You can select
Hearing impaired to display the hearing impaired
subtitles with your selected language.

Selecting decoding page language in Teletext

Press MENU on the remote control and select
Options > Teletext > Decoding page language.
Select a proper type of language in which Teletext will
display.

Digital Teletext language

For digital TV channels, your TV could change to a
service with multiple initial Teletext pages in different
languages. This function allows you to select an
available language as primary language, which
relates to different initial Teletext pages.
Press MENU on the remote control and select Options
> Teletext > Digital teletext language. Press ◄/► to
select.
SPDIF type
Connect to an audio device through the SPDIF
output. Press MENU on the remote control and select
Options > SPDIF type. Select a proper sound type
from the list for digital programmes.
- If the current programme outputs sound in Dolby D
format, then either PCM or Dolby D can be selected.
- If the current programme does not output sound
in Dolby D format, only PCM can be selected.
Otherwise no sound will be output.
- Select Off to turn off the audio output from the audio
device connected to the SPDIF output.
Note: The options you may choose depend on the
programme you are watching. If you select
PCM and the sound is ahead of the picture,
you can select SPDIF delay from the Options
menu and press ◄/► to adjust the delay time
to synchronize the sound with the picture.
T-Link
Use this function to search for CEC devices
connected to the HDMI sockets in your TV and enable
one-touch play and one-touch standby between CEC
devices.
Enabling or disabling T-Link
1. Press MENU on the remote control, then select
Options > T-Link.
2. Press ◄/► to select On or Off.
Using one-touch play
One-touch play enables you to press the play button
on, for example, your DVD remote control. This starts
playback on your DVD device and automatically
switches your TV to the correct source, displaying DVD
content.
Using system standby
System standby enables you to press the
for example, your TV remote control. This switches
your TV and all connected HDMI devices to standby
mode.

Network update

Press MENU on the remote control, then select
Options > Network update. Select On/off to enable
or disable the Network update function.
- When this function is on, the TV will automatically
update channels if your DTV service provider
updates his DTV network.
- When this function is off, you need to run the
channel search again to get new channels or
remove unavailable channels if your DTV service
provider adds or removes channels from their DTV
network.

Common interface

Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instruction described below. Wrong insertion of a
common interface module may damage both the
module and your TV.
Following the directions printed on the common
1.
interface module, gently insert the module into the
common interface slot on the TV.
EN 8
Using more of your TV
button on,