Schedule List; Network Connection - JVC LT-32HA48U Guide D'utilisation

by TV network due to copyright protection (HD
content, recording protection). Please use
Option on the remote control to check if this
feature is available in your product.
1. Press Option on the remote control and in the
Quick access menu, select PVR.
2. Press OK/► to enter.
3. Press:
- the red button to start recording, the record file is
put into a folder named after the channel number
under the PVR folder in Media center > Video;
- the green button to stop recording manually; if
the recording duration finishes, the recording will
stop automatically.
- ▲/▼/◄/► to adjust the recording duration.
Note: If you change channels while recording a
programme, a prompt will appear on screen
asking you whether you want to confirm the
channel change. If you do so, your recording
will be interrupted.
4. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. To watch the recorded programme, exit PVR
mode first and go to Media center > Video. Select
the folder PVR, then select the related record file.
Press OK to play. (It is the same if you record a
digital radio programme).
Notes:
- Feature available only for digital non encrypted
channels. Even when CICAM (CI or CI+) is
inserted, feature is not available on encrypted
channels.
- Only supports USB memory device of FAT32
format.
- Before you connect the USB device to the set,
make sure you have backed up the data in the
device to avoid the loss of your important data
due to unforeseen malfunction.
- The bigger the USB device memory size for the
PVR function, the longer the recording time.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play files normally if the
parameters of the file exceed the limitations of
the system, the file format is not supported, the
file is damaged, or the file cannot be decoded.
- Do not disconnect the USB memory device
when the system is reading a file or transmitting
data, otherwise the system or the device may be
damaged.

Schedule list

This function is used to perform scheduled recording.
1. Press Option on the remote control and in the
Quick access menu, select Schedule list.
2. Press OK/► to display the schedule list.
3. To add a schedule into your schedule list, press
the red button first to display Schedule list. Then,
- Channel number: use ◄/► to select the
channel number.
- Start date: use the numeric buttons to set the
recording date.
- Start time: set the start time of the recording.
- Stop time: set the stop time of the recording.
- Schedule type:
• Set Reminder to be reminded that you can
switch to the scheduled programme when
the time you have set comes. When time is
out and you do not execute any operation,
the dialog box will disappear and no further
operation will be executed.
• Set Record to check if you really want to
start your scheduled recording when the time
you have set comes. When time is out and
you do not execute any operation, scheduled
recording will start automatically.
- Repeat type: set different repeat modes for the
recording.
4. Press ▲/▼/◄/► to select Add, then press OK to
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter and follow the instructions
on screen.
7. Press Exit to close the menu.

Network connection

This function is available only for CI+ modules with
LSC function. For detailed description, please contact
service provider or refer to instruction book provided
by service provider.
Connecting to a wired network
You can attach your TV to your LAN using cable in
three ways:
• You can attach your TV to your LAN by connecting
the LAN port on your TV to an external modem
using a Cat 5 cable.
• You can attach your TV to your LAN by connecting
the LAN port on your TV to an IP Sharer, which is
connected to an external modem. Use Cat 5 cable
for the connection.
• Depending on how your network is configured,
you may be able to attach your TV to your LAN by
connecting the LAN port on your TV directly to a
network wall outlet using a Cat 5 cable. Note that
the wall outlet is attached to a modem or router
elsewhere in your house.
1. Press Menu on the remote control and select
Options > Ethernet network > Configuration >
Internet connection. Press ◄/► to select On.
EN 14
Using more of your TV