Preventing Device Damage - Seca 665 Mode D'emploi

Preventing device
damage
►
Make sure that the patient does not step onto
and off the weighing platform right at the
edges.
►
Make sure that the patient steps onto and off
the weighing platform slowly and safely.
WARNING!
Risk of slipping
►
Ensure that the weighing platform is dry
before the patient steps onto it.
►
Ensure that the patients feet are dry before he
or she steps onto the weighing platform.
►
Make sure that the patient steps onto and off
the weighing platform slowly and safely.
NOTICE!
Damage to device
►
Ensure that no liquids enter the device. They
can damage the electronics.
►
Switch off the device before disconnecting
the power supply unit from the mains socket.
►
Disconnect the power supply unit from the
mains socket if you intend to not use the de-
vice for a longer period of time. Only this way
it can be ensured that the device is current-
less.
►
Make sure not to drop the device.
►
Do not expose the device to any impacts or
vibrations.
►
Perform function controls regularly as de-
scribed in the relevant section in this docu-
ment. Do not operate the device if it is
damaged or not working properly.
►
Ensure that there is no heat source in the im-
mediate vicinity. Do not expose to direct sun-
light. The excessive temperature could
damage the electronics.
►
Avoid rapid temperature fluctuations. When
the device is transported so that a tempera-
ture difference of more than 20 °C occurs, it
must stay turned off for at least 2 hours be-
fore it can be turned on again. Otherwise,
condensation water will form which can dam-
age the electronics.
English
Safety information • 59