Troubleshooting; Technical Data; Disposal - MAXXMEE YF-118-12 Mode D'emploi

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does
not work. The con-
trol lamp (2) does
not light up.
Water emerges
from the steam
bottom (9).
No steam is pro-
duced.

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Protection class:
Capacity of water reservoir: approx. 250 ml

Disposal

Dispose of the packaging material in an environmentally friendly manner and take
it to a recycling centre.
Dispose of the device in an environmentally friendly manner at a recycling cen-
tre for used electrical and electronic devices. It should not be disposed of in the
regular domestic waste. More information is available from your local authorities.
23
Possible cause / solution
• Is the mains plug inserted in the plug socket correctly? Cor-
rect the fi t of the mains plug.
• Is the plug socket defective? Try another plug socket.
• Check the fuse of the mains connection.
• Has the On / Off switch (5) been pressed correctly? To switch
on the device, hold down the On / Off switch for approx. 3
seconds.
• The temperature has fallen below the operating temperature.
Wait until the control lamp is constantly lit up before pressing
the steam release button (3).
• The water reservoir (13) is empty. Top up the water reservoir.
• The device has not yet reached operating temperature. Wait
until the control lamp is constantly lit.
02620
YF-118-12
220 – 240 V ~ 50 / 60 Hz
1200 W
I
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines
are subject to charges. The cost
varies depending on the service
provider.)
All rights reserved.
EN