Auto Power Off Function; Checking The Lamp Life Status; Reversing/Inverting Projected - Sharp XV-Z3000U Mode D'emploi

9 Auto Power Off
9 9
9 9
Function
Selectable
items
When no input signal is detected for
On
more than 15 minutes, the projector will
automatically enter standby mode.
Off The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
0 Checking the Lamp Life
0 0
0 0
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Lamp usage condition
"Life"
Operated exclusively
with Lamp Setting set to
"Eco + Quiet"
Operated exclusively
with Lamp Setting set to
"Bright"
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the us-
age condition.
Description
Remaining lamp life
100% 5%
Approx. Approx.
3,000 150 hours
hours
Approx. Approx.
2,000 100 hours
hours
Menu operation n Page 41
Options 2
1
PRJ Mode
2
RS-232C
3 STANDBY Mode
4 Fan Mode
5
All Reset
6 Language
Settings on the Options 2 menu
1 Reversing/Inverting
1 1 1 1
Projected Images
Selectable items
Front Normal image (Projected from
the front of the screen)
Ceiling + Front Inverted image (Projected
from the front of the screen
with an inverted projector)
Rear Reversed image (Projected
from the rear of the screen or
with a mirror)
Ceiling + Rear Reversed and inverted image
(Projected with a mirror)
See page 19 for details of Projection (PRJ) Mode.
INPUT 1
Front
9600 bps
Eco
Normal
English
Description
49