Rear View - Sharp XV-Z3000U Mode D'emploi

Part Names and Functions (Continued)
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.

Rear View

Intake vent
AC socket
Connect the
supplied Power cord.
Rear adjustment
foot
Terminals
6 5
Terminal
INPUT 1, 2 terminal
1
Connecting video equipment with component output terminal (DVD
player, DTV decoder, DVD recorder with hard disc, etc.).
INPUT 3 terminal
Connecting video equipment with S-video output terminal (VCR, DVD
2
player, etc.).
INPUT 4 terminal
3
Connecting video equipment without S-video output terminal.
INPUT 5 terminal
I Connecting video equipment with component output terminal
4
(DVD player, DTV decoder, DVD recorder with hard disc, etc.).
I Connecting the computer.
INPUT 6 terminal
5
Connecting video equipment with HDMI output terminal.
RS-232C terminal
6
Connecting the computer to control the projector.
TRIGGER terminal
When the projector is turned on, a control signal (DC 12V) outputs from this
7
terminal. If an electric screen or other compatible device is connected, it
can be turned on when the projector is turned on.
12
51
28
31
4
Description
1 2 3
Exhaust vent
51
Remote control
15
sensor (rear)
Kensington
13
Security Standard
connector
7
Page
23
24
24
25
26
25
27
—