When Connecting To Separately Sold Power Amp - Pioneer AVH-4400BT Manuel D'installation

Section
01 Connecting the units

When connecting to separately sold power amp

Rear output
Front output
Subwoofer
output
Blue/white (5*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 5*
and 6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
Perform these connections when
using the optional amplifier.
6
En
This product
To rear output
To front output
To subwoofer
output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Connect with RCA cables
(sold separately)
System remote control
Left

Subwoofer


Front speaker


Rear speaker

Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Right

Subwoofer


Front speaker


Rear speaker
