Dovre VINTAGE 35GA Type C11 Mode D'emploi page 54

2
2. Remove the box with the wood block set and other
parts included separately in the delivery from the
appliance.
3. Remove the burner (1) from the stove; see next
figure.
1
4. Remove the mirror panels from the stove; see fol-
lowing figures.
The mirror panels are glass and very fra-
gile.
a. Unscrew the two glass attachment brackets
on the back with parts (1) and (2).
b. Lift the rear mirror panel (3) from the groove.
c. Remove the panel from the stove.
d. Repeat steps (a) through (c) for both side
panels.
8
1
09-20020-186
09-20020-187
Placing the stove
2
1 3
3
2 1
Preferably place the stove on a flat floor. The stove
is equipped with levelling screws in the floor plate
so the appliance can be levelled perfectly; see next
figure.
Subject to change because of technical improvements
09-20020-188
09-20020-189