Geberit AQUACLEAN Mera Classic Instructions De Montage page 52

EN
8
Test the <User profile> 1–4 button. Perform
tests as follows: Start the shower procedure.
Adjust the spray arm position. Press the
user profile button.
✓ The spray arm moves back to the factory
setting position.
✓ All buttons are assigned a user profile.
Resetting the storage water
heater
If the storage or transport temperature
exceeds 45 °C, the thermal cut-out will be
tripped.
Prerequisite
– The status LED on the lateral control panel
flashes red.
52
1
Demount front cladding.
2
Reset the thermal cut-out of the storage
water heater.
9007203612975499-1 © 11-2018
968.543.00.0 (00)