Geberit AQUACLEAN Mera Classic Instructions De Montage page 51

Prerequisite
– The remote control is paired with the device.
1
Test the <Shower> button for the anal
shower.
✓ The device performs a shower cycle.
Pressing the <Shower> button again
interrupts the shower cycle.
2
Test the <+> and <-> buttons.
✓ During a shower cycle, the spray
intensity can be altered.
3
Test the <left> and <right> arrow keys.
✓ During a shower cycle, the spray arm
position can be changed.
9007203612975499-1 © 11-2018
968.543.00.0 (00)
4
Test the button combination for switching on
the oscillating spray.
✓ The oscillating motion can be switched
on and off by pressing the <left> and
<right> arrow keys at the same time.
5
Test the <Lady shower> button.
✓ The device performs a shower cycle.
Pressing the <Lady shower> button
again interrupts the shower cycle.
6
Test the <Dryer> button.
✓ The dryer arm extends. Warm air drying
begins.
7
Check the <Toilet flush> button.
✓ The flush actuates.
EN
51