Geberit AQUACLEAN Mera Classic Instructions De Montage page 49

Masquer les pouces Voir aussi pour AQUACLEAN Mera Classic:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
Re-assign remote control
The device can only be operated with a
single, assigned remote control.
Press the <+> button on the remote control
and the <top> button on the lateral control
panel for approx. 30 seconds.
Result
✓ The [Pairing ok] confirmation appears on the
display.
✓ The shower toilet can be controlled by remote
control.
Testing automatic flush actuation
Prerequisite
– The automatic flush actuation has been
switched on in the [Basic settings] main menu.
Apply a load to the WC seat for more than
10  s econds. Then remove the load.
Result
✓ A flush is actuated after around 5  s econds.
9007203612975499-1 © 11-2018
968.543.00.0 (00)
Testing the spray functions
For the following test steps, weight must be
applied to the WC seat to simulate a user.
The LED on the lateral control panel lights
up blue during this.
1
Test the anal shower function.
✓ The device performs nozzle cleaning.
✓ The spray arm extends.
✓ The anal shower begins with both nozzle
openings active.
✓ After completing the shower cycle, the
spray arm retracts.
✓ The device performs nozzle cleaning.
EN
49

Publicité

Table des Matières
loading

Table des Matières