Attaching A Fl Oor Nozzle; Mounting Accessory Nozzles - DS Produkte VSC28 Mode D'emploi

2. Insert the funnel in the water tank opening and fi ll the water tank using the enclosed
measuring cup.
Please note that the capacity of the water tank amounts to approx. 1.15 litres!
3. Close the water tank by pushing the water tank cap down and at the same time turning it
clockwise.
Attaching a fl oor nozzle
Your fl oor steam cleaner is now ready for use!

Mounting accessory nozzles

02652_DE-GB-FR-NL_V1.indb 28 02652_DE-GB-FR-NL_V1.indb 28
1. Connect the steam gun with the main unit by lifting the pro-
tective cap on the main unit and insert the connection piece
for the hose into the socket on the front of the appliance.
Make sure that the hose audibly locks into place.
Note: To remove the hose, push the release buttons on both
sides of the hose connection piece and pull out the hose.
2. Stick the three parts of the extension tube together.
3. Stick one end on the steam gun.
4. Stick the fl oor nozzle on the other end of the extension
hose.
5. Place the fl oor nozzle on the fl oor cleaning cloth and fi x the
overhanging sides of the fl oor cloth in place using the fl oor
nozzle clips by pushing on the clips, inserting the cloth, and
releasing the clip.
1. Connect the steam gun with the main unit by lifting the pro-
tective cap on the main unit and insert the connection piece
for the hose into the socket on the front of the appliance.
Make sure that the hose audibly locks into place.
Note: To remove the hose, push the release buttons on both
sides of the hose connection piece and pull out the hose.
2. The accessory nozzles are located in the storage compart-
ment on the inside of the main unit. Push the release button
for the storage compartment and pull off the top part of the
main unit.
28
25.02.2013 12:19:44 25.02.2013 12:19:44