Smartphone Search - Beurer AS 97 Mode D'emploi

6.16 Smartphone search

If you cannot find your smartphone, you have the option of making the
smartphone ring and vibrate using the activity sensor.
To make the smartphone ring and vibrate using the activity sensor:
- both devices must be connected via Bluetooth
- sound and vibration must not be deactivated on the smartphone
- the distance between the two devices must be less than 5 metres
- the "beurer HealthManager" app must be open on the smartphone.
To start the smartphone search, proceed as follows:
1. Press the button on the activity sensor twice. The number of steps
in the display.
2. Press and hold the button on the activity sensor for 3 seconds.
the display.
3. Press and hold the button on the activity sensor again for 3 seconds.
in the display.
4. Now briefly press the button on the activity sensor.
The activity sensor now tries to find the smartphone. Once the activity sensor
has found the smartphone, an alarm sounds on the smartphone and it starts
to vibrate.
®
63
appears
appears in
appears
appears in the display.