Maintenance/Servicing; Technical Specification - Bibby Scientific Stuart SC6 Plus Mode D'emploi

Maintenance & Servicing
WARNING: Ensure the unit is
disconnected from the mains electricity
supply before attempting maintenance or
servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
Spares and Accessories
The following spares and accessories are available
from your laboratory dealer:
Description
x1.7 magnifier
x3 magnifier
Wolffhuegel graticule
& segmentation disk (pack of 10)
Centering adapter (pack of 2)
Clear protective discs (pack of 5)
Receiver plate
Printer
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Sales Department at Bibby
Scientific Ltd quoting both the model and serial
number.
Only spare parts supplied or specified by
Bibby Scientific Ltd. or its agents should be
used. Fitting of non-approved parts may
affect the performance and safety features
designed into the instrument.
If in any doubt, please contact the Technical
Service Department of Bibby Scientific Ltd. or the
point of sale.
Bibby Scientific Ltd.
Stone, Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
e-mail info@bibby-scientific.com
www.bibby-scientific.com
4
Warranty
Bibby Scientific Ltd warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of three (3) years. In the event of a
justified claim, Bibby Scientific will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorized
personnel.
Catalogue
Number

Technical Specification

SC6/1
SC6/1/3
Digital display 3 digit
Light source
SC6/2
Count
SC6/3
Dish size up to
SC6/4
Dimensions (w x d x h)
SC6/5
Net weight
SMP30/1
LED
White LED
0 to 999
90 mm
310 x 300 x 140 mm
1.5Kg