Bibby Scientific Stuart SC6 Plus Mode D'emploi page 2

English
Figure 1: SC6 Plus controls
Background
adjustment
Dish adapters
Figure 3: Underneath the SC6 Plus
Magnifier position
Control panel
Receiver
plate
Thank you for purchasing this piece of Bibby
Scientific equipment. To get the best
performance from the equipment, and for
your own safety, please read these
instructions carefully before use.
This equipment is designed to operate under the
following conditions:-
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
If the equipment is not used in the manner
described in this manual the protection provided
by the equipment may be impaired.
Printer
connector
Mains
on/off
switch
Figure 2: SC6 Plus back panel
Sensitivity
adjustment
PC
connector
(USB)
IEC
mains
socket
Fuse