Table Des Matières; Configuration - Titan IMPACT 540 Mode D'emploi

CONTENTS / SPECIFICATIONS
1 SAFETY REGULATIONS FOR AIRLESS
SPRAYING ______________________________ 3
1.1 Explanation of symbols used _____________________3
1.2 Grounding instructions _________________________3
1.3 Safety hazards ________________________________3
2 GENERAL DESCRIPTION __________________ 5
3 OPERATION _____________________________ 6
3.1 Using the gun trigger lock _______________________6
3.2 Pressure relief procedure ________________________6
3.3 Setup _______________________________________6
3.4 Preparing a new sprayer ________________________7
3.5 Preparing to paint _____________________________7
3.6 Painting _____________________________________8
3.7 Control panel indicators ________________________8

Configuration

Name
Model #
Specifications
Gallons per minute
Maximum tip sizes
Maximum pressure
Weight
Maximum hose length
Power
1.20 Brushless motor, 120 V, 60 Hz, 11.0 A
Generator requirement 5000 Watt (disable idle-down feature)
Included accessories
Spray gun
Spray hose
Spray filter
Literature
Operation manual
(Form No. 805-906)
Service manual (Form
No. 2424935)
available online at www.titantool.com
RX-Pro manual (Form
No. 0538801)
Conforms to
UL STD 1450
Compliance
Certified to CAN/CSA
STD C22.2 No 68
Certified to CAN/CSA STD C22.2 No. 68
Intertek
WARNING! CALIFORNIA PROPOSITION 65 WARNING
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer,
birth defects, or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
2
Skid
540
805-001
0.60 (2.3 LPM)
0.024"
3300 PSI (22.8 MPa)
36 lbs.
300'
RX-Pro
50' (15 m) P/N 316-505
60 mesh, P/N 0089958
English / French / Spanish
included with product and available
online at www.titantool.com
English / French / Spanish
All languages
included with product and available
online at www.titantool.com
Conforms to UL STD 1450
4 SPRAYING TECHNIQUE ___________________ 9
4.1 Cleaning a clogged tip __________________________9
5 CLEANUP ______________________________ 10
5.1 Special cleanup instructions for use with
flammable solvents ___________________________10
5.2 Cleaning the sprayer __________________________10
5.3 Maintenance ________________________________10
6 TROUBLESHOOTING ____________________ 11
ACCESSORIES ____________________________ 32/33
WARRANTY _________________________________ 34
High cart
540
805-006
0.60 (2.3 LPM)
0.024"
3300 PSI (22.8 MPa)
57 lbs.
300'
1.20 Brushless motor, 120 V, 60 Hz, 11.0 A
5000 Watt (disable idle-down feature)
RX-Pro
50' (15 m) P/N 316-505
60 mesh, P/N 0089958
English / French / Spanish
included with product and available
online at www.titantool.com
English / French / Spanish
available online at www.titantool.com
All languages
included with product and available
online at www.titantool.com
Conforms to UL STD 1450
Certified to CAN/CSA STD C22.2 No. 68
IMPACT 540
Low cart
540
805-003
0.60 (2.3 LPM)
0.024"
3300 PSI (22.8 MPa)
57 lbs.
300'
1.20 Brushless motor, 120 V, 60 Hz, 11.0 A
5000 Watt (disable idle-down feature)
RX-Pro
50' (15 m) P/N 316-505
60 mesh, P/N 0089958
English / French / Spanish
included with product and available
online at www.titantool.com
English / French / Spanish
available online at www.titantool.com
All languages
included with product and available
online at www.titantool.com
Conforms to UL STD 1450
Certified to CAN/CSA STD C22.2 No. 68