System Requirements; Paper Specifications; Physical Specifications; Power Specifications - HP Deskjet F2200 Série Guide D'utilisation

Chapter 2

System requirements

Software system requirements are located in the Readme file.

Paper specifications

• Input tray capacity: Plain paper sheets: Up to 80 (75 gsm (20 lb.) paper)
• Output tray capacity: Plain paper sheets: Up to 50 (75 gsm (20 lb.) paper)
NOTE:

Physical specifications

• Height: 18.05 cm (7.11 inches)
• Width: 42.57 cm (16.76 inches)
• Depth: 26.74 cm (10.53 inches)
• Weight: 5.27 kg (11 lbs)

Power specifications

• Power consumption: 20 watts (average printing)
• Input voltage: AC 100 to 240 V ~ 1 A 50–60 Hz
• Output voltage: DC 32 V===375 mA, 16 V===500mA
• Power supply: 0957-2231, AC 100 to 240 V ~ 1 A 50–60 Hz (±3 Hz)
• Power supply: 0957-2248, AC 200 to 240 V (±10%), 50 - 60 Hz (±3 Hz)
NOTE:

Environmental specifications

• Recommended operating temperature range: 15º to 30º C (59º to 86º F)
• Allowable operating temperature range: 10º to 35º C (50º to 95º F)
• Humidity: 15% to 80% RH non-condensing
• Non-operating (Storage) temperature range: –20º to 50º C (–4º to 122º F)
• In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One
may be slightly distorted
• HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields

Regulatory notices

The HP All-in-One meets product requirements from regulatory agencies in your country/region. For
a complete listing of regulatory notices, see the onscreen Help.

Regulatory model identification number

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is VCVRA-0706. This regulatory number should not be
confused with the marketing name (HP Deskjet F2200 All-in-One series, etc.) or product numbers
(CB683A, etc.).
12 HP Deskjet F2200 All-in-One series
For a complete list of supported media sizes, see the printer software.
Use only with the power adapter supplied by HP.