Status Light Overview - HP Deskjet F2200 Série Guide D'utilisation

Chapter 1

Status light overview

Several indicator lights inform you of the status of the HP All-in-One.
Label
1
2
3
4
The following table describes common situations and explains what the lights mean.
Light status
All lights are off.
The On light and one of the Paper
Type lights are on.
The On light is blinking.
The On light blinks quickly for 3
seconds and then is on steady.
The On light blinks for 20 seconds
and then is steady.
The Paper light is blinking.
The Check Print Cartridge light is
blinking.
4 HP Deskjet F2200 All-in-One series
Description
On light
Check Print Cartridge lights
Paper light
Paper Type lights (for the Paper Type button)
What it means
The HP All-in-One is turned off. Press the On button to turn on the device.
The HP All-in-One is ready for printing, scanning, or copying.
The HP All-in-One is busy printing, scanning, copying, or aligning the
print cartridges.
You pressed a button while the HP All-in-One is already busy printing,
scanning, copying, or aligning the print cartridges.
You pressed the Scan button and there was no response from the
computer.
• The HP All-in-One is out of paper.
• The HP All-in-One has a paper jam.
•
The print cartridge door is open.
• The print cartridges are missing or not seated correctly.
• The tape was not removed from the print cartridge.
•
The print cartridge is not intended for use in this HP All-in-One.