Operation - Bartscher Compact Ice K 100073 Mode D'emploi

5.3 Operation

Before first use
•
Before using the device for the first time, clean it (see 6.2 „Cleaning").
•
Carry out 2-3 ice cube making cycles according to the description presented below.
CAUTION!
For reasons of hygiene, throw ice cubes from the first 2-3 cycles away and do not
use them to prepare drinks or cool foodstuff.
Ice cube making process
NOTE!
Remember that during the first cycle it can take up to one hour for ice cubes
to be made.
•
Open the lid and pour ca. 1,5 litres fresh drinking water into the container. Close the lid.
CAUTION!
Fill the container only with fresh drinking water!
Pour water into the water container to just below the mark!
•
Connect the device to the single earthed socket.
•
Press the „Select" button
ice cubes" lights up. Pressing the „Select" button
the ice cube size for
•
Press the „Start"
•
Water is pumped into the water
container through the
evaporator's tube.
•
In the evaporator's form, 24 ice
cubes are made per cycle.
•
Ready, transparent ice cubes fall
via the ice scoop in blocks and
get to the ice cube basket.
•
One ice cube making cycle takes
approx. 25-30 min., depending on
the selected ice cube size.
- 24 -
on the control panel. The green indicator
„Small ice cubes".
button to start the ice cube making process.
once again, you may change
Evaporator's form
Ice scoop
Ice cube basket
„Large