Technical Specification; Installation And Operation; Safety Instructions - Bartscher 135.013 Mode D'emploi

4.2 Technical specification

Name
Art. no.:
Construction:
Power:
Capacity per hour:
Container:
Dimensions:
Weight:
Subject to technical changes and alterations!

5. Installation and operation

5.1 Safety instructions

WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with protective
contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the cable dangle
over the counter edge.
•
Do not use the device in case it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the device or
personal injury, and further, the warranty expires.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep away the
cable from operating range and do not dunk it into water.
•
One should avoid all contact with moving elements of the unit. Never place fingers or objects
into the ice filling or collecting area.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with that of the
device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
All manuals and user guides at all-guides.com
Stainless steel casing, plastic
W 172 x D 240 x H 463 mm
Ice crusher 4 ICE
►
135.013
230 V ~ 50 Hz 25 W
approx. 15 kg
approx. 3.5 liters / 1.75 kg
approx. 3.6 kg
- 17 -