Control Panel; Frostmatic Function - AEG A92700GNW0 Manuel D'utilisation

CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined sound
of buttons to a loudly one by pressing to-
gether Mode button and Temperature
colder button for some seconds. Change
is reversible.
DISPLAY/INDICATOR
1
Timer indicator
1

FROSTMATIC function

2
Minute Minder function
3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
SWITCHING ON
To switch on the appliance do these
steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the dis-
play is off.
3. The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
6
2 3 4 5 6
1
5 4 3
4. If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if..." paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature refer
to "Temperature regulation".
If the door remains open for some
minutes, the light will turn off au-
tomatically. The light is reset by
closing and opening the door it-
self.
SWITCHING OFF
To switch off the appliance do these
steps:
1. Press the ON/OFF button for few sec-
onds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug
from the power socket.
TEMPERATURE REGULATION
The set temperature of the freezer may
be adjusted by pressing the temperature
button.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.
FROSTMATIC FUNCTION
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
ENGLISH
2
29