Control Panel; Frostmatic Function; High Temperature Alarm - AEG A51100HSW0 Notice D'utilisation

To operate the appliance, proceed as follows:
• turn the Temperature regulator towards
obtain the minimum coldness.
• turn the Temperature regulator towards
obtain the maximum coldness.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.

CONTROL PANEL

1 Pilot light
2 High temperature alarm light
3 Frostmatic light
4 Frostmatic switch

Frostmatic function

You can activate the Frostmatic function by pressing the Frostmatic switch.
The Frostmatic light will light up.
It is possible to deactivate the function at any time by pressing Frostmatic switch. The
Frostmatic light will switch off.

High temperature alarm

An increase in the temperature in the freezer (for example due to an power failure) is indi-
cated by switching on of the Alarm light
During the alarm phase, don't place food inside the freezer.
When normal conditions are restored the Alarm light will switch off automatically.
to
to
1 2 3
Control panel
4
23