Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation page 64

FUNCTION
ROLLER SHUTTER/VENETIAN BLIND, RUNNING TIME, INITIAL OPERA-
TION (Selection of the shading solution, running time of roller shutter/venetian
blind, date of initial operation)
AUTO
EXPERT MODE
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until FUNCTION appears.
3. Confirm with OK. ROLLER SHUTTER/VENETIAN BLIND appears.
4. You can choose between roller shutter/venetian blind using the +/- buttons.
5. Confirm with OK. RUNNING TIME appears.
6. You can set the necessary running time using the +/- buttons. (Presetting:
120 seconds).
7. Confirm with OK. EXPERT MODE OFF/ON appears.
8. You can select the desired setting using the +/- buttons.
9. Confirm your selection with OK. INITIAL OPERATION appears.
10. Confirm with OK.
11. Press the MENU button to switch to Operating mode.
64 - en
FUNCTION
INITIAL OPERATION
ROLLER SHUTTER
FUNCTION
RUNNING TIME
AUTO