Settings - Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation

Setting menu
SETTING
In the SETTING menu, you have the following options:
• HOLIDAY
• SUN (if the sensor is connected)
• TWILIGHT (if the sensor is connected)
• INTERMEDIATE POSITION
• VENTILATION/TILT
• PROG1 (END POS, INTERM POS, VENT/TILT)
• PROG2 (END POS, INTERM POS, VENT/TILT)
• TEST MODE (if a sensor is connected)
• Language selection (ENGLISH)
• ASTRO SHIFT
• ASTRO SHIFT
• City selection (LONDON)
• LONGITUDE (Appears only with EXPERT MODE ON)
• LATITUDE (Appears only with EXPERT MODE ON)
• TIME ZONE (Appears only with EXPERT MODE ON)
• SUMMER/WINTER (Automatic summer/winter time adjustment)
To carry out settings, press the OK button repeatedly until you come to the de-
sired menu item.
HOLIDAY
The holiday function simulates an occupied house while you are on holiday.
If the function is active (ON), the roller shutter/venetian blind operates in a
staggered fashion at the programmed times (max. + 30 min.).
END POSITION
When the roller shutter/venetian blind is in the upper or lower position, this is
described as an end position.
48 - en

Settings