Charging The Battery; Inserting The Sd Memory Card; Settings; Switch Between Photo, Video And Playback - Wohler VE 300 Mode D'emploi

6.2

Charging the battery

Fig. 11: Micro USB charging cable
6.3 Inserting the SD memo-
ry card
Fig. 12: Inserting the SD memory card
6.4

Settings

6.4.1 Switch between photo,
video and playback
mode

Press the ON/OFF-button to switch the Video
Endoscope on and off.
When the Wöhler VE 300 is switched on, the
ON/OFF-button will shine blue.
If the battery voltage is low, the ON/OFF-button
will shine red.

To charge the device, connect the USB charg-
ing cable to the charging port, see fig. 1, part
6. Connect the other end of the charging cable
to the mains adapter.
When the device is switched on, the battery icon
in the display will be colored when charging is in
process.
ATTENTION!
Make sure the device is powered off before
operating the SD memory card.
Power off the device, open the cover on the back-
side of the monitor and insert the SD memory
card, see fig. 1, part 6.
ATTENTION!
Please make sure the card is inserted correct-
ly.
NOTE!
It will only be possible to make settings, if the SD
memory card is inserted. The Settings-button and
the M-button will only be active, if the SD memory
card is inserted.

Click M-button to switch the photo mode
video mode
Before the inspection
and playback mode
EN
,
.
25