Indication Of The Title Information, Playing Time And Bpm Indication; Selecting The Operating Mode; Short Replay Of A Title Beginning; Fast Forward And Reverse - IMG STAGELINE CD-196USB Mode D'emploi

the button ❙◀ or ▶❙ repeatedly until "Folder"
appears in the text line . After releasing the
buttons, no more play list is loaded .
5.3 Indication of the title information,
playing time and BPM indication
1 . Information about the title are indicated
in the text line (N):
– for standard audio CDs with CD text: the
title name
– for MP3 mode: the file name
The text line can be switched over to the
indication of the following information (ID3
tags) . For this purpose keep the button
TIME / TAG (5) pressed and select with the
button ❙◀ or ▶❙ (18):
Indication (L)
TITLE = name of title
ALBUM = name of album
ARTIST = name of artist
none = file name
With the button FOLDER (4) it is possible
to switch over the text line between the
indication of the respective title informa-
tion and the indication of the name of the
folder (or, when a play list is loaded, the
name of the play list) .
2 . The playing time of the title is displayed
as a numeric indication (O); the seconds are
subdivided in 75 frames . In addition, the bar
graph (H) represents the playing time, re-
ferred to the duration of the title, graphically
by its length (relative time presentation) . The
last 30 seconds of a title are indicated by the
bar graph flashing in its full length, the last
15 seconds are indicated by faster flashing .
The playing time indication can be switched
over with the button TIME / TAG (5):
– If "Elapse" (E) is shown, the time already
played of the title is indicated .
– If "Total Remain" (F, G) is shown, the re-
maining time of the entire CD is indicated
(not possible for MP3 mode) .
– If "Remain" (G) is shown, the remaining
time of the title is indicated .
3 . After selecting a title, the beat counter auto-
matically determines the number of beats per
minute (BPM) . After a short time the number
appears in the BPM indication (P) . If the
beat counter cannot determine a correct
value (e . g . for quiet music titles), the value
can also be determined manually:
a) Shortly press the button BPM (21) several
times to the beat of the music (4 times as
a minimum) . The number of beats appears
and the indication "BPM" flashes to show
the manual counting mode .
b) To switch back to the automatic counting
mode, keep the button BPM pressed until
the indication "BPM" stops flashing .

5.4 Selecting the operating mode

To switch over between single title replay
[indication "Single" (C)] and continuous re-
play [indication "Cont ." (D)], press the button
CONT . / LIST (6) .
1 . For the single title replay the unit is
switched to pause after replay of each title .
This mode is especially provided for DJ
applications . If this mode has been adjusted,
after selecting a title, the player will be set to
pause precisely on the spot where the music
starts (mostly not at the time index 0:00:00
but some frames later, e . g . 0:00:15) . This
spot will be automatically stored as a starting
point (Auto Cue point) and shown on the
display by the indication "CUE" (K) . After
starting the title, it is possible to return to
this starting point with the button CUE (17) .
After replaying a title, the unit will be set to
pause precisely on the spot where the music
of the next title starts . This spot will then be
stored as a new starting point .
2 . For the continuous replay all titles (MP3
mode: all titles of the folder or play list) are
played continuously one after the other,
i . e . after the last title the first title restarts .
While replaying and when selecting titles, no
Auto-Cue points are set .
Note: In some cases also in the mode "continuous
replay" an Auto-Cue point is set (however, not
exactly according to frame at the start of music
but at the time index 0:00:00), e . g . after reading
in a data carrier .

5.5 Short replay of a title beginning

The button CUE (17) allows the short replay of
a title beginning as long as this button is kept
pressed . After releasing the button, the unit will
return to the title beginning and is set to pause .
1) The player must be set to single title replay:
indication "Single" (C) . If "Cont ." (D) is
shown, press the button CONT . / LIST (6) .
2) Select the title (selection of title and folder
or play list ☞ chapter 5 .1 or 5 .2) .
3) By keeping the button CUE pressed, shortly
replay the title beginning .
4) To replay the title, press the button

5.6 Fast forward and reverse

For fast forward or reverse of a title, first press
the button SEARCH (20) . "SEARCH" will be indi-
cated in the text line (N) . Turn the jog wheel (16)
into the corresponding direction . The forward /
reverse speed depends on the turning speed of
the wheel .
To switch off the function, press the but-
ton SEARCH again (indication "SEARCH" dis-
appears) . In the replay mode, the function will
automatically be switched off 8 seconds after
actuating the wheel the last time .
Note: In the pause mode, the current spot is constantly
repeated after fast forward or reverse . To stop the
repeat, either press the button CUE (17) shortly twice
(new Cue point is set, ☞ chapter 5 .8) or start the
replay with the button ▶❙❙ (19) .

5.7 Precise selection of a certain spot

A spot in the title can be selected with the pre-
cision of 1 frame (¹⁄ second) if e . g . for starting
75
the replay from a certain spot instead of starting
it from the beginning of a title .
1) When the desired spot is roughly reached by
replaying the title or by using fast forward /
reverse ( ☞ chapter 5 .6), set the unit to pause
▶❙❙
with the button (19) .
2) Precisely select the spot by turning the jog
wheel (16) clockwise and counter-clockwise .
For an acoustic check the adjusted spot will
be constantly repeated .
3) When the desired spot has been found,
shortly press the button CUE (17) twice . Thus,
the spot will be stored and repeating will end .
The replay can now be started from this point
with the button ▶❙❙ .

5.8 Return to a certain spot (Cue point)

To be able to quickly go to a certain spot, a
starting point (Cue point) can be stored with
the button CUE (17) . However, in the single title
replay mode, this point will be overwritten with
the starting point (Auto-Cue point) of the next
title when the next title is reached or selected
[if required, switch over to total title replay with
the button CONT . / LIST (6)] .
Note: The Cue point stored will be deleted:
– when selecting another folder (or another play list)
– when switching over between CD and USB storage
medium
– when switching off the unit
1) While replaying, set the unit to pause with
the button ▶❙❙
to which the unit is to return later . The LED
above the button CUE (17) flashes .
2) If required, use the jog wheel (16) to go
to the precise spot (
turning the wheel, the spot is permanently
repeated .
3) Press the button CUE . Thus, the spot is mem-
orized as a Cue point . "CUE" (K) is indicated
on the display and the LED above the but-
ton CUE lights up continuously . To stop the
repeated replay of the spot, the button CUE
can be pressed again .
4) Restart the replay with the button
5) With the button CUE it is now possible to
return to the Cue point . After the return,
CUE is inserted on the display and the player
is set to pause .
6) Start the replay with the button
the button CUE pressed as long as the title
▶❙❙ (19) .
is to be played . After releasing the button
CUE, the player goes back to the Cue point
and is set to pause .
5.9 Changing the speed with or
without displacing the pitch
The speed can be changed with the sliding con-
trol (11) up to ±100 %:
+100 % = double speed
−100 % = standstill
1) Select the adjusting range with the button
PITCH (9) . The adjustment selected with the
button PITCH is shown via the two LEDs (10)
next to the button:
– both LEDs off:
speed control deactivated,
the title is played at standard speed
– LED 8 % lights up:
speed control activated,
adjusting range ±8 %
– LED 16 % lights up:
speed control activated,
adjusting range ±16 %
– both LEDs light up:
speed control activated,
adjusting range ±100 %
In addition, each time the button PITCH
is pressed, the text line (N) shortly shows
the selected adjustment: "Pitch 8 %",
"Pitch 16 %", "Pitch 100" or "Pitch off" .
2) Adjust the speed with the sliding control . The
display will show the percentage deviation
from the standard speed on the top right
(l) . The number of beats per minute (P) will
change accordingly .
3) When the speed is changed, the pitch will
also change proportionally . However, for a
(19) when the spot is reached
☞ chapter 5 .7) . After
▶❙❙
.
▶❙❙ or keep
13