Technical Data - Weller WX 1 Traduction De La Notice Originale

Technical Data

Dimensions L x W x H
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature range
Tool dependent
Temperature accuracy
Temperature stability
Air consumption
Compressed air connection
Compressed air
Air flow:
* WXA 2: Nitrogen N2 reduces oxidation and flux remains active for longer. We recommend the nitrogen N2 that is available in
steel bottles. The bottle must be equipped with a 0-10 bar pressure reducer.
Subject to technical alterations and amendments.
soldering station soldering station
WX 1 WX 2
170 x 151 x 130 mm
6,69 x 5,94 x 5,12 inch
ca. 3,2 kg ca. 3,2 kg
230 V, 50 Hz / 120 V, 60 Hz / 100 V 50/60 Hz
200 W 200 W (255 W)
I, antistatic housing
III, Soldering tool
T2 A (230 V)
T4 A (120 V)
100 - 450°C (550°C)
200 - 850°F (999°F)
± 9 °C / ± 17 °F
± 2 °C / ± 4 °F
-
-
-
desoldering station
WXD 2
ca. 3,8 kg
200 W (255 W)
35 l / min, max vacu-
um 55 kPA (8 psi)
Compressed air
hose outer diameter
6 mm (0,24")
Inlet pressure 400 -
600 kPA
(58-87 psi); oil-free,
dry compressed air
-
GB
ENGLISH
Hot air station
WXA 2
ca. 3,8 kg
200 W (255 W)
-
Compressed air hose
outer diameter 6 mm
(0,24")
Inlet pressure 400 -
600 kPA
(58-87 psi) oil free,
dry compressed air or
nitrogen (N2) *
approx. 0-18 l/ min at
6 bar
19