Safety Information For Circular Saw Blades; Original Accessories/Auxiliary Equipment - Parkside PHKSA 20-Li A2 Traduction Des Instructions D'origine

Scie circulaire sans fil
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING!
Do not operate the appliance with a damaged
cable, power cable or power plug. A damaged
power cable poses a threat of a fatal electric
shock.
Supplementary notes:
Do not use any grinding discs.
Use only saw blades with diameters
corresponding to the label on the saw.
Always use the right saw blade for the material
being worked.
Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool.
Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1.
When sawing plastic, avoid melting the plastic.
Wear a dust mask when sawing.
Only use recommended saw blades.
Always wear hearing protection!
Safety information for circular
saw blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
 GB │ IE │ NI
8
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment which are specified in the
operating instructions and are compatible
with the appliance.
WARNING!
Do not use any accessories not recommended
by PARKSIDE. This can lead to electric shock
and fire.
WARNING! Protect yourself
from laser radiation!
LASER
P max.: < 1 mW • λ: 650 nm •
EN 60825-1:2014
Never look directly into the laser beam or the
opening from which it emerges.
WARNING!
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
Caution! If operating and adjustment
equipment or procedures other than those
specified here are used, this may result in
hazardous radiation exposure.
Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
CAUTION!
If operating and adjustment equipment is
used or procedures other than those specified
here are carried out, this may result in
hazardous radiation exposure.
2
PHKSA 20-Li A2

Publicité

Table des Matières
loading

Table des Matières