Miele KMTY Mode D'emploi page 36

en - Cleaning

Danger of burning.
Allow the Tepan Yaki to cool down to
touch before cleaning it.
Food deposits and fat can burn in
when the Tepan Yaki is heated up
and become very difficult or even im-
possible to remove.
Always clean the Tepan Yaki after
every use.
For very heavy soiling, allow the Te-
pan Yaki to cool down completely
then apply Miele ceramic and stain-
less steel cleaner liberally to the en-
tire surface. Cover the Tepan Yaki
with cling film and leave the cleaning
agent to soak in for approx. 24 h.
Then remove the soiling with water
and a washing-up sponge.
Sharp tools and aggressive cleaning
agents will damage the surface.
Do not use abrasive cleaning agents
or hard brushes and sponges to
clean it.
The Tepan Yaki can be cleaned in the
dishwasher. We recommend cleaning
it by hand (prolonged cleaning in a
dishwasher will damage the surface).
Overheating the Tepan Yaki can cause
discolouration to a golden brown
shade. This will not affect the func-
tioning of the Tepan Yaki.
The discolouration can be removed by
dissolving a heaped teaspoon of
Vitamin C (ascorbic acid) in hot water
and allowing it to soak into the Tepan
Yaki.
36
 Remove coarse soiling with kitchen
paper towel.
 To remove stubborn or burnt-on soil-
ing, soak the Tepan Yaki in a solution
of hot water and washing-up liquid
until it can be wiped clean easily.
 After each use, clean the Tepan Yaki
with a solution of warm water and a
little washing-up liquid applied with a
sponge or a soft brush.