Pioneer DJM-900SRT Serato DJ Edition Mode D'emploi page 8

Operation is not guaranteed on all computers, even if all the required operating environment
conditions indicated here are fulfilled.
Depending on the computer's power-saving settings, etc., the CPU and hard disk may not
provide sufficient processing capabilities. For notebook computers in particular, make sure
the computer is in the proper conditions to provide constant high performance (for example
by keeping the AC power connected) when using Serato DJ.
Use of the Internet requires a separate contract with a provider offering Internet services and
payment of provider fees.
Installation Procedure (Windows)
Do not connect this unit and the computer until installation is completed.
Log on as the user which was set as the computer's administrator before
installing.
If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer's CD drive.
The CD-ROM menu is displayed.
If the CD-ROM menu does not appear when the CD-ROM is inserted, open the
CD drive from [Computer (or My Computer)] in the [Start] menu, then double-
click the [CD_menu.exe] icon.
2 When the CD-ROM's menu appears, select [Download
Serato DJ Software.], then click [Start].
To close the CD-ROM menu, click [Exit].
3 "An internet environment is required to access the site.
Connected to the internet?" is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is displayed.
4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ
support site.
[Serato DJ Support Information] is displayed.
5 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.
6 Log in to your "Serato.com" user account.
If you have already registered a user account on "Serato.com", proceed to
step 8.
If you have not completed registering your user account, do so following the
procedure below.
— Following the instructions on the screen, input your e-mail address and
the password you want to set, then select the region in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the
latest information on Serato products will be sent from Serato.
— Once user account registration is completed, you will receive an e-mail at
the e-mail address you have input. Check the contents of the e-mail sent
from "Serato.com".
Be careful not to forget the e-mail address and password specified when you
performed user registration. They will be required for updating the software.
The personal information input when registering a new user account may
be collected, processed and used based on the privacy policy on the Serato
website.
7 Click the link in the e-mail message sent from "Serato.com".
This takes you to the Serato DJ download page. Proceed to step 9.
8 Log in.
Input the e-mail address and password you have registered to log in to "Serato.com".
9 Download the Serato DJ software from the download
page.
Unzip the downloaded file, then double-click the unzipped file to launch the installer.
10 Read the terms of the license agreement carefully, and if
you agree, select [I agree to the license terms and conditions],
then click [Install].
If you do not agree to the contents of the usage agreement, click [Close] to
cancel installation.
Installation begins.
8
En
The message of successful installation appears once installation is completed.
11 Click [Close] to quit the Serato DJ installer.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is completed.
If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer's CD drive.
The CD-ROM menu is displayed.
Double-click the CD icon on the desktop when folders are not displayed after a
CD-ROM has been loaded.
2 Double-click [CD_menu.app].
3 Select [Download Serato DJ Software.] from the CD-ROM's
menu, then click [Start].
4 "An internet environment is required to access the site.
Connected to the internet?" is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is displayed.
5 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ
support site.
[Serato DJ Support Information] is displayed.
6 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.
7 Log in to your "Serato.com" user account.
If you have already registered a user account on "Serato.com", proceed to
step 8.
If you have not completed registering your user account, do so following the
procedure below.
— Following the instructions on the screen, input your e-mail address and
the password you want to set, then select the region in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the
latest information on Serato products will be sent from Serato.
— Once user account registration is completed, you will receive an e-mail at
the e-mail address you have input. Check the contents of the e-mail sent
from "Serato.com".
Be careful not to forget the e-mail address and password specified when you
performed user registration. They will be required for updating the software.
The personal information input when registering a new user account may
be collected, processed and used based on the privacy policy on the Serato
website.
8 Click the link in the e-mail message sent from "Serato.com".
This takes you to the Serato DJ download page. Proceed to step 9.
9 Log in.
Input the e-mail address and password you have registered to log in to "Serato.com".
10 Download the Serato DJ software from the download
page.
Unzip the downloaded file, then double-click the unzipped file to launch the installer.