Hitachi YUTAKI S80 Série Manuel D'utilisation page 34

UNIT INSTALLATION
6.2 REMOVING THE COVERS
If it is necessary to access to the indoor unit components, please
follow these operations.
6.2.1 Removing the indoor unit covers
?
N O T E
• The pictures shown correspond to the YUTAKI S80 TYPE 1, but the
procedure for removing covers is exactly the same for the TYPE 2
except in case of lateral covers.
• Front cover needs to be removed for any task inside the indoor unit.
• Back cover does not need to be removed.

Removing the indoor unit front cover
1 Unscrew the 2 fixing screws at the lower side.
2 Pull the indoor unit front cover forward and then remove it.

Removing the indoor unit upper cover
1 Remove the indoor unit front cover.
2 Unscrew the 2 upper fixing screws.
24 PMML0340B rev.1 - 03/2016
3 Pull the indoor unit upper cover forward and then remove it.

Removing the indoor unit lateral cover
?
N O T E
Pictures refer to the left side cover, but the removal procedure is exactly
the same for the right side cover.
1 Remove the indoor unit front cover.
2 Remove the indoor unit upper cover.
3 Unscrew the screws which fix the cover to the indoor unit.
TYPE 1 (5 screws)
TYPE 2 (6 screws)