Before Using Your Appliance For The First Time; Filling Up The Pipe System - Siemens TK 65 Série Notice D'utilisation

Before using your appliance for the first
time
General
Switching on
the appliance
Filling up the pipe
system
FILL UP PRESS
PIPE-SYS Water
PIPE-SYSTEM
FILLS UP
30
Fill the respective containers with pure, non carbonated
water only and preferably a mixture of espresso or coffee
beans.
Do not use coffee beans which have been glazed,
caramelised or treated with other additives containing sugar.
These will block the grinding unit.
Check the water hardness with the enclosed test strip.
If a value other than hardness 4 is indicated, switch on
the appliance and program accordingly (see Page 39).
The water hardness can also be found out from your local
water supply company.
q Pull the power cord out of the cord store and connect.
q Fill the water tank 22 with cold fresh water. Note the
max." mark.
q Fill the bean container 15 with coffee beans.
q Set mains switch 1 to I.
d
q Press button
i
The appliance is ready for use when the illuminated rings
d
on button 4 and on the on" button 2 5 are lit
green.
Note: If the appliance is being used for the first time or has
not been operated for a prolonged period, the first cup of
coffee will not have the full aroma and should not be drunk.
For production reasons when switched on for the first time,
the water pipe system in the appliance may occasionally have
to be refilled:
q Place an appropriate cup under the froth nozzle 13.
q Press the 0 2a button.
4.