Ethernet Connection - Kemper 611 00 Manuel D'utilisation

EN
5.4
Connect the data logger to your network using
an Ethernet cable. If DHCP is deactivated in
the network, an IP address must be assigned
manually.
Note!
No network connection is necessary
if the device is used exclusively as a
data logger.
22/ 64 – K410061100000-00 – 07.2020 – © www.kemper-olpe.de

Ethernet connection

Network
Ethernet cable
You can find the data point list
at:
www.kemper-olpe.de/oc/coldwa-
ter-cooler-gateway/
Data logger