Ethernet Connection; Datalogger - Kemper KHS CoolFlow 611 00 Manuel D'utilisation

EN EN
5.4
Connect the data logger to your network using
an Ethernet cable. If DHCP is deactivated in the
network, an IP address must be assigned manually.
Note! No network connection is
necessary if the device is used exclusi
vely as a data logger.
22 /64 – K410061100000-00 / 11.2021– © www.kemper-olpe.de

Ethernet connection

www.kemper-olpe.de/oc/coldwater-cooler-gateway/
Network
Ethernet cable
You can find the data point list at:
Data logger