Troubleshooting; What To Do If - AEG BSE798280M Notice D'utilisation

Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Remove the metal ring and clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Attach the metal ring to the glass cover and install it.
Side lamp
Step 1 Remove the left shelf support to get access to the lamp.
Step 2 Use a Torx 20 screwdriver to remove the cover.
Step 3 Remove and clean the metal frame and the seal.
Step 4 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 5 Install the metal frame and the seal. Tighten the screws.
Step 6 Install the left shelf support.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

12.1 What to do if...

The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
TROUBLESHOOTING
Remedy
Check if the oven is correctly connected to the
electrical supply.
41/216