How To Replace: Lamp; Troubleshooting - AEG BEE431011M Notice D'utilisation

Make sure that you put the glass panels (A and B)
back in the correct sequence. Check for the symbol /
printing on the side of the glass panel, each of the
glass panels looks different to make the disassembly
and assembly easier.
When installed correctly the door trim clicks.
Make sure that you install the middle panel of glass in
the seats correctly.

12.4 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
24 ENGLISH
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
A B
Step 3
Put a cloth on the bottom of the cav‐
ity.
A
B