How To Set: Clock Functions - AEG BEE431011M Notice D'utilisation

Clock function
Time Delay
Minute Minder

8.2 How to set: Clock functions

How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
- press repeatedly to change the time of day.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
How to set: Duration
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
How to set: End Time
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
Application
To combine functions: Duration and End Time.
To set a countdown. This function has no effect on the operation of the
oven. You can set this function at any time, also when the oven is off.
- press to set the time.
- starts to flash.
- press to set the duration.
.
- starts to flash.
- press to set the time.
.
- starts to flash.
ENGLISH 11