How To Use: Descaling - AEG BSE798280M Notice D'utilisation

Step 5 Reassemble the water drawer.
Step 6 Snap in the wave-breaker. Push it
into the drawer body.
Step 7 Assemble the lid. First insert the
front snap and then push it against
the drawer body.
Step 8 Insert the water drawer.
Step 9 Push the water drawer towards the
oven until it latches.

11.6 How to use: Descaling

Turn off the oven and wait
until it is cold.
Duration of the first part: around 100 min
Step 1 Place the deep pan on the first shelf position.
Step 2 Pour 250 ml of the descaling agent in the water drawer.
Step 3 Fill the remaining part of the water drawer with water to the maximum level.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf posi‐
tion.
Duration of the second part: around 35 min
Step 7 Fill the water drawer with water. Make sure there is no remaining descaling agent in‐
side the water drawer. Insert the water drawer.
Step 8 When the function ends, remove the deep pan.
When this function works, the lamp is off.
M
A
X
Before you start:
Remove all accessories.
CARE AND CLEANING
M
A
X
Make sure that the water drawer
is empty.
37/216