dB Technologies SUB615 Manuel D'utilisation page 28

CASE B (STEREO connection between a subwoofer and 2 speakers, figure 3)
1. Connect mixer L, R outputs to subwoofer INPUTS 1 and 2 respectively.
2. Daisy-chain the signal to the speakers, connecting OUTPUTS 1 to LH speaker Input, OUTPUTS 2 to RH
speaker Input.
3. Select the impedance for each speaker ("LINE" type).
4. Set subwoofer OUTPUTS MODE [4] to XOVER, in order to daisy-chain a signal having a crossover
frequency of 120 Hz to the speaker.
SUB 615 - SUB618
28
Figure 3
English
Cod. 420120251 REV. 1.0