For Products With A Water Dispenser - Beko BBBF2410IM Manuel D'utilisation

Masquer les pouces Voir aussi pour BBBF2410IM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A possible problem in
power cable may cause
fire.
The plug' s tip should
be regularly cleaned;
otherwise, it may cause
fire.
The plug's tip should be
cleaned regularly with a
dry cloth; otherwise, it
may cause fire.
Refrigerator may move
if adjustable legs are not
properly secured on the
floor. Properly securing
adjustable legs on the
floor can prevent the
refrigerator to move.
When carrying the
refrigerator, do not hold
it from door handle.
Otherwise, it may be
snapped.
When you have to place
your product next to
another refrigerator or
freezer, the distance
between devices
should be at least 8cm.
Otherwise, adjacent
side walls may be
humidified.
For products with a
water dispenser;
Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers is you are not
sure that there is no
water hammer effect
in your installation.
Do not install on the
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
8
EN

Publicité

Table des Matières
loading

Table des Matières