Changing The Illumination Lamp; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply - Beko BBBF2410IM Manuel D'utilisation

Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
place foodstuffs in the refrigerator/
freezer in a safe and comfortable
way.The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
below -20 °C.
(only chest and upright freezer)
Connecting the water hose
to the refrigerator
1. Slip the union (b) onto the
water hose (a).
2. Push the water hose
downwards firmly to slip it onto the
water inlet valve (c).
3. Tighten the union (c) by hand to
secure it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However,
you can use a spanner or pliers to
tighten the union if there is a leakage
Connecting the water line
to the water supply
Connect the water line to a water
supply valve. If a valve is not present
or you are not sure, consult a qualified
plumber.
14
EN