Vestfrost VTS 258 Mode D'emploi page 21

"P1"
Regulating probe TR3 failure
"P2"
EVP Probe Failure
"P3"
Logging probe TL1 failure
"P4"
Logging probe TL2 failure
"HA1" TR3 High Alarm
"LA1" TR3 Low Alarm
"HA3" High temperature alarm probe
TL1
"LA3" Low temperature alarm probe
TL1
"HA4" High temperature alarm probe
TL2
"LA4" Low temperature alarm probe
TL2
"dA" Door Open Alarm
"EA" External Alarm
"CA" Serious Alarm
"Real Time Clock Error".
Alarms at start up
When the unit is started up the first time the alarm will sound/show until the unit has reached
the upper temperature alarm limit. This can take several hours.
It is possible to mute the alarm for 30 minutes. See below explanation.
Muting the alarm
When an alarm occurs any button on the display can be pushed to mute the alarm for 30
minutes. The alarm will still be visible at the display and the red LED will continue to flash.
Alarm output ON; Compressor output according
to parameters Con and CoF
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Compressor and fans depend on "rrd"
Output unchanged
All outputs OFF
Please set the date and time. See page 16
21
GB